Juicer Shell Injection Mould

The juicer plastic shell is made of high strength PC material (also called bulletproof glue). The strength and toughness are very good, and it won't cra ck. The abrasive cups are made of top grade plastics, very strong, and completely non-toxic after national testing.

1, the working principle of juicer

The juice is stirred by the blade to rotate the food which is pressed under the pusher bar, and the juice and the pulp are separated by the centrifugal force of the high speed rotating of the filter screen. If you have a beautiful juicer, you can easily make your and your family love to drink all kinds of fruit juice, fresh and nutritious.

2, blade

The juice machine adopts the high quality chromium manganese alloy steel, the hardness is very high, high pressure Juicer blades with no residue, will not forget to clean the rust; when the rotary agitator blades and the level of about 60 degrees, this point is the best cutting angle. Each blade of the juicer is very strict with the blade, which not only requires the best cutting angle of the blade, but also strictly specifies the hardness, toughness and wear resistance of the blade.

3, juice machine improper operation, there will be dangerous?

No, the juicer will not start when it is not properly installed. It will automatically turn off when the temperature is too high or the current is too high. And juicer has a safety chain control, can be said to be very safe.

Here is the juicer need to pay attention to the process of use of some matters:

When stirring, each soybean can not be excessive, because the stirring concentration is big, the effect is not good.

When the concentration is large, it should stop immediately, dilute, pour out and then stir. When pouring soybean milk, don't uncover the cover, otherwise you will pour out the bean dregs and strainer

It is not suitable to stir up excessive food. No more than 3 pieces of soy milk should be stirred every time

In use, the juicer / agitator must be placed flat on the work table and operated in accordance with the above requirements.

Juice, often check the juice tank, fruit dregs; inside the fruit juice or fruit residue is too full, if too full, first cut off the power supply, cleaning and then use.

Before pressing, first confirm the screen with the driving wheel disc filter in place, and the outer cover tool without rigid collision, the outer cover is covered, and closely linked to slipknot before boot function.

In use, don't open the cup cover. When the power is not cut off, don't put the handle or other appliance into the juice cup and juice into the feed port, otherwise it will cause injury accident or damage the machine.

In order to ensure the service life of the motor, with over temperature protection device, when the motor long time or overload operation, the high temperature will automatically disconnect the power after the motor stops, must be the power line plug, when the motor cooling (about 30 minutes), can be used again.

All fittings are prohibited to be sterilized in high temperature disinfection cabinet.

Please don't leave it when you use it. Don't let the children close.

In the mixing, stirring meat, grinding is strictly prohibited no-load long journey and overload use.

After each operation, the power line plug should be pulled out before taking out the things.

We assure to offer the precise plastic injection mould according to the customers different requirement. Always keep efficient production and reasonable price.